有的时候我们发现施工完的塑胶跑道，用上一段时间就会出现异味，大家基本都知道出现这种情况的原因是因为使用原材料的问题，其实还有一个原因也是可以引起这一现象的，业内人士爆料称，施工过程当中假如操纵欠妥，也会出现施工停止后塑胶跑道呈现异味的情况。
Sometimes, we found that the construction of plastic runway, use for a period of time will appear peculiar smell, everyone know this happens because the basic use of raw materials, but there is another reason why also can cause this phenomenon, the personage inside course of study revealed that, if inappropriate manipulation of the construction process, also can appear after construction has stopped plastic runway odor rendering.
如果塑胶跑道施工的工程中全部采用手工铺设，尚未形成机械化操纵，这时施工方很有可能为了便利本身施工，会采用增加甲苯、二甲苯溶剂或采用其他稀释剂的方法，目的就是为了调整其固化的速率。
If all adopt manual laying of plastic runway construction engineering, mechanical manipulation has not been formed, when the contractor is likely to facilitate the construction itself, will increase with toluene, xylene solvent or use other diluent method, the purpose is to adjust its curing rate.
“增加了这些化学身分后，塑胶跑道不仅仅干的速度变快了，平整度也变得更好，施工起来也变得非常的省事了，但这些增加剂假如不合格，可能会存在残留物质。”所以对于添加剂的分量一定要控制好。
"Increased after the chemical identity, plastic runway just dry speed faster, flatness is better, construction and also become very convenient, but these increase the dose if not qualified, there might be residual substance." So for the additive component must be good control.
业内人士称，塑胶跑道施工在正常的情况下，应当做好取样送检的工作，但部门厂商为了能够加快速度，会先将样板送检再动工。“一般情况下跑道还没有完全做好，检验的报告就已经回来了。”
The personage inside course of study says, plastic runway construction in normal circumstances, shall do a good job in sampling inspection of manufacturers in order to speed up, but the department will first makes the model will be started again. "In general the runway is still not fully prepared, test report has come back."